If the same patch of your garden floods every time it rains, work out where the water comes from before choosing a drain. Here is what to look for and what to ask when you get a quote.
Where does the water come from?
Go outside after sustained rain and mark where water first appears. A flooded corner at the foot of a hill suggests runoff; a puddle restricted to one patch of lawn may point to a dip or compacted soil. Watch where downpipes discharge and whether the water follows a paving edge. Photograph the same spots an hour later and the next morning. If a drain backs up or water reaches the house, arrange an assessment before rebuilding the garden.
Why design for wet winters?
The Met Office’s State of the UK Climate 2025 reports that October to March was 13% wetter in 2016–2025 than in 1961–1990 across the UK. That figure describes a national trend. On your plot, the slope, soil and size of the area shedding rain will determine where water goes. For scale, 10 mm of rain on a 30 m² surface is 300 litres before any infiltration or other losses.
When is changing the garden levels enough?
If water collects where two surfaces meet, ask whether correcting their levels will move it safely to a planted area that can absorb it. Have the contractor draw arrows showing the proposed direction of runoff. Look for door thresholds, air bricks, retaining walls and boundary fences on the drawing. A path that dries quickly has little benefit if the same water ends up against the house or on a neighbour’s land.
When would a channel drain, rain garden or land drain help?
A channel drain intercepts runoff at a specific edge. Ask where it discharges and how you will lift the grate to remove leaves. A rain garden can hold water temporarily where the soil and overflow route are suitable. The RHS rain garden guide explains how soil drainage affects its size. A perforated land drain may help a persistently wet area where there is a suitable outlet. A buried pipe still needs somewhere for the water to go, and an infiltration solution on slow-draining ground may need a site test.
What should a drainage quote show?
Give each contractor your wet-weather photos and ask for the same scope. Request the finished levels, the outlet and overflow routes, and any testing or permissions included. Check who is responsible for locating buried services, removing spoil and reinstating paths or planting. Ask which grates or inspection points you will need to keep accessible. If a contractor proposes digging a soakaway, ask how they established the ground can take the water and what happens when it is already saturated.
How much of the garden needs to be dug up?
That depends on the route to the outlet. A short channel can sometimes be installed across the edge of a paved area, while drains designed to collect water across a lawn may need several trenches. Walk the route with the installer before work starts and identify which plants or paving you want to keep. Agree where soil can be stored and how excavators or barrows will reach the work area without damaging the parts of the garden you intend to retain.
What can you check after the work?
Ask the installer to show you the inspection points before they leave and keep a copy of the drain layout. In the first spell of sustained rain, photograph the areas you recorded before the work. A planted basin may hold water briefly by design. The useful comparison is whether water now follows the planned route and whether the lawn or path returns to normal sooner.
Summary
Follow the water from the point where it enters your garden to a suitable outlet. If the fix involves changing levels, rebuilding paving or installing drainage, McDonald Landscapes can discuss the hard landscaping work with you.
Explore Hard Landscaping Services
